Tarpstop's domestic 24x27 Lumber Tarps are manufactured in our Ohio and Indiana factories. They are sized for covering 8' tall loads of lumber or similar. They are 24' wide, so they will have an 8' side drop when used on an 8' wide load. Included End Flap is 10W x 8H. Made with 18oz vinyl coated fabric, we weld our seams and our hems are double lock-stitched with #207 bonded thread. We install brass grommets every 24" around the bottom edge plus 2 additional rows of dee rings above the hem for a total of 3 tiedown rows along each side. The dee rings are sewn under continuous rows of 2" wide seatbelt webbing and the rows are placed 30" and 60" up from the bottom edges. If you are looking for a high-quality lumber tarp manufactured in the USA this is it!
Specifications
| Weight: 115 lbs | Width: 24' |
| Material: 18 oz. PVC-Coated Polyester | Length: 27' |
| Color: Black | Cold Crack Resistance: -40°F |
A typical Lumber Tarp is 24' wide and 27' long. Additional rows of webbing and dee rings can be added to allow the tarp to be pulled down to cover shorter loads. An end flap is standard on lumber tarps. Our Tarpstop Lumber Tarps are Made in the USA in our Ohio and Indiana shops and are the best quality available. We also offer imported tarps "fleet tarps" for those applications that require an inexpensive or short-term solution. Flatbed is our specialty. We cater to operators and fleets with a focus on quality and service.
| Call to Order | No |
|---|
Watch Our Videos
With both a wide selection of tarps for Lumber, Steel, Machinery and more you are sure to be covered. Flatbed is our specialty. We cater to operators and fleets with a focus on quality and service.
Watch More
